This heavy-duty production blade produces an excellent finish on the top and bottom of thick laminates and melamine. The LU92M series is ideal for cutting stacked 3/4" laminates and melamine. Each tooth has a special modified triple chip grind design created by computer simulation to breeze through thick stock and single or double-sided laminates, leaving a chip-free edge.
- Premium TiCo HI-Density Carbide Laminate Blend for Maximum Performance
- Modified Triple Chip Grind (MTCG) Tooth Design for long life and chip free cuts in thick stock manmade materials
- Negative Hook Angle minimizes chipping in laminates and melamine
- Silver Ice Coating resists corrosion and pitch build-up
Ideal For: Double Sided Laminates and Stacked Chipboard is ideal for cutting stacked 3/4" laminates and melamine
Blade information
| Recommended use & cut quality | Rips wood | Fair |
| Crosscuts wood | Good | |
| Chip board | Excellent | |
| Plywood | Excellent | |
| Laminate | Excellent | |
| Non-ferrous | Not recommended | |
| Recommended depth of cut | Minimum | 1" |
| Maximum | 2-3/4" |
Technical specifications
| Arbor | 1" |
| Diameter | 14" |
| Grind | MTCG |
| Hook angle | 6° |
| Kerf | 138" |
| Plate | .098" |
| Teeth | 84 |