Spray at up to 50% lower pressure with the Reverse-A-Clean (RAC) 214 Fine Finish Low Pressure (FF LP) RAC X SwitchTip. This fine finish tip produces a 4 to 6 inch fan pattern and a 0.014 inch orifice. Reverse the SwitchTip to easily clear clogs.
For fine finish applications
- Less Prep & Cleanup Time
- Less mess with less overspray
- Put the paint where you want it
- Easiest Pattern Overlap
- Softer spray fan pattern
- Easy to apply any material to any surface
- Consistent blended finish quality
- Extended Life
- Spraying at half pressure doubles tip life
- Reduced sprayer maintenance – up to 2X life
- SmartTip Technology
- Exclusive internal tip geometry
- Reduces energy required to atomize paints, stains, and other materials
- Delivers a superior finish with less pressure
- Works with SmartControl on select Graco sprayers
- Best Tip on the Market
- Works with any airless sprayer
- Longest lasting fan pattern
- Highest quality finish with a consistent spray pattern
- Easy to Identify Tip SizeSuperior Tip Design
- Large raised tip size numbers are always legible – even when covered with paint
- Locking tab ensures tip stays securely in guard
- Snaps tip in spray or reverse position
- OneSeal tip gasket installs with no tools
- Solvent seal available when using extremely hot solvents
Technical Specifications
| Compatible material | Primer, stains, varnish, water-based paint, enamel, latex, solvent-borne paints |
| For use with | RAC X HandTite Tip Guard |
| Material | Tungsten carbide |
| Maximum fan width | 6 in |
| 15.2 cm | |
| 152 mm | |
| Minimum fan width | 4 in |
| 10.2 cm | |
| 102 mm | |
| Maximum flow rate | 0.21 GPM |
| 0.79 L/min | |
| Maximum working pressure | 4050 psi |
| 28000 kPa | |
| Model | RAC X |
| Orifice Diameter | 0.014 in |
| 0.0356 cm | |
| 0.3556 mm | |
| Pattern size | 4 to 6 in |
| 101.6 to 152.4 mm | |
| Spray pattern | Fan |
| Tip type | Airless |
| Type | Spray tip |
| Document | Warning insert |