- For loads of at least 600 Newton metres
- Push-through square drive for right/left switchover
- Including hammer function
- Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads
- Fine-pitched ratchet mechanism, small return angle of 6°
The ratchet that can also be safely and officially used as a hammer. The KOLOSS is a reversible, heavy-duty ratchet that can be used with a load of at least 600 Newton metres. The dual ratchet teeth and the minimum return angle of only 6° ensure rapid and precise screwdriving even in confined situations. And the best thing: absolutely no impact on the hammer faces, however hard, can destroy the ratchet mechanism. Multi-component Kraftform handle optimised to withstand pressure, impact and tensile loads; take-up for KOLOSS extension 8780 C and KOLOSS centring pin 8781 C at end of handle. Also included in the set: 1 pad to protect materials and surface areas, 1 Koloss extension for the transfer of even more torque, 1 unlocking pin and 1 holster – so the Koloss can always be at hand.
Set contents:
| 8002 C 05003545001 | 1 x 1/2" x 341 mm |
| 8780 C Koloss extension | 1 x 341 x 137 mm |
| 8000 HLF 05671319001 | 1 x 175 x 75 mm |
| 8782 C Koloss pad set | 1 x # 2 x 50 mm |
| Unlocking pin | 1 x 40,5 mm |
| 8781 C Koloss centring pin | 1 x 50 mm x 135 mm |
Features:
- The heavy-duty ratchet that can also be safely used as a hammer.
- Typical fields of application are mechanical engineering, boatbuilding, mining, aircraft construction, bridge building, commercial vehicle construction and maintenance, railway and road construction and maintenance, industrial plant and equipment construction, high-bay warehouse construction, petroleum industry and many more.
- Non-removable sealed and hardened square drive for tough jobs.
- Changing the ratchet direction using a hardened push-through square drive ensures great resilience, since there is no susceptible switching mechanism that could be damaged by hammer blows. This is far more robust than a forward/reverse switch.
- Tubular shaft minimizes impact vibrations
- Dry-fined hammer face
- Used with rubber pad attachments to protect materials and surfaces.
- The drop-forged hammer head is permanently pinned to the shaft in a form-fit joint. This guarantees an almost non-detachable positioning of the hammer head on the handle.
- Dual ratchet teeth
- Gives the robust 30 saw teeth the precision engineering effect of 60 fine teeth with a 6° return angle.
8781 C Koloss centring pin
- KOLOSS centring pin can be used with Wera KOLOSS 8002 C
- To align lugs or drill holes.
- Conical pin
- Out of tough, hardened chrome-molybdenum steel
Centring pin for the Wera Koloss. To align lugs or drill holes. Conical pin, tough, hardened chrome-molybdenum steel.